The WaterBug 350 is a water detection device ideal for computer rooms, document storage areas, warehouses, sump pumps and basements. WaterBug sensors activate the alarm when a conductive bridge is formed between 2 contacts.

Power Requirement 9VDC via alkaline battery @ 40μA (resting)
Sensitivity Will not alarm due to high humidity or condensation.
Battery Life One to two years (not included)
Operating Temp 32˚ to 140˚F (0˚ to 60˚C); non-condensing environment (indoor use only)
Output Open-collector output
25mA max collector current
30 VDC max on trip line
Buzzer (Integrated) 83 dB @ 30 cm @ 9VDC, pulsed

Max Cable Length 1-2 probes; max recommended distance of 200’ (61 m)
3-6 probes; max recommended distance of 100’ (30.5 m)


Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Article is closed for comments.